MDM6000 Satellite Modem

mdm6000-satellite-modem.jpg
mdm6000-satellite-modem.jpg

MDM6000 Satellite Modem

0.00

The MDM6000 Satellite IP Modem is a versatile next generation modem optimized for a wide range of applications such as cellular backhauling, IP trunking and fiber restoration. The MDM6000 modem is typically installed at both ends of a point-to-point satellite link or at the remote sites of a star network. The unit can work as a modulator, demodulator or modem depending on the network configuration and integrates seamlessly with terrestrial networks and equipment. The modem is in full compliance with the DVB-S2 and DVB-S2X standards, achieving the highest possible efficiency at maximum service availability.

Quantity:
Add To Cart
 

Efficiency at the Core

The Newtec MDM6000 Satellite Modem combines a number of innovative elements to improve current market available efficiencies, thereby lowering the overall Total Cost of Ownership.

New modulation and Forward Error Correction (FEC) codes up to 256APSK in the DVB-S2X standard in combination with innovative technologies such as 133 Mbaud, Clean Channel Technology®, Bandwidth Cancellation (BWC), Automatic Uplink Power Control (AUPC), FlexACM®, QoS, Shaping and Equalink® 3 are embedded in the modem and bring the satellite link to full efficiency.

Depending on the application, the Newtec MDM6000 Satellite Modem can be used in conjunction with the Newtec HUB6000 Satellite Hub. The performance can be increased even more by adding Newtec’s network optimization technologies, such as acceleration, compression and bandwidth management.

Key Features

  • Very granular rate licensing scheme with rates from 1 Mbps up to 425 Mbps bidirectional

  • Suitable for low, medium and high speed applications, for cellular backhaul, trunking and fiber restoration, baudrates upto 133 MBaud to handle all common transponder sizes

  • Clean Channel Technology for additional bandwidth efficiency gains

  • DVB-S2, DVB-S2X (up to 256APSK) and Newtec S2 Extensions backward compatibility

  • Built-in Bandwidth Cancellation (up to 72 Mbaud) with fractional licensing for redundant modem 

  • Optional Equalink® 3

  • All modcods and baudrates default enabled licensing on a per Mbps encapsulated rate.

  • Default IF and L-band on Tx and Rx for ease of operation

  • Automatic Uplink Power Control for combating uplink fading

  • Optional FlexACM for adaptive environments

  • Standard GSE encapsulation for minimal overhead with support for ULE, MPE, XPE for legacy networks

  • Adaptive traffic shaping and bandwidth management

  • Advanced Quality of Service (QoS)

  • Easy integration with terrestrial IP data networks

  • Easy operation through secure frontpanel, SNMP, HTTP and CLI interfaces